Skip to content

Insulin Pump

This section allows you to choose your insulin pump. Most options are self-explanatory. For more information on compatible insulin pumps, please see the following link

Step 1: Add Pump

The first step in setting up your insulin pump on Trio is to tap the "Add Pump" button in the Devices Menu

Pump Selection

Step 2: Select Your Pump

Select your pump from the in-app menu and from the options below for step-by-step instructions. The links below will guide you through the connection instructions for your specific pump.

Medtronic

Step 3 Choose your insulin type and tap "Continue"

Medtronic Screen 1

Step 4 Connect your RileyLink, OrangeLink, or EmaLink and tap "Continue"

Medtronic Screen 2

Step 5a Enter your pump region and color

Step 5b Enter your 6-digit pump ID

Then, tap the "Connect" button when it turns blue at the bottom.

Medtronic Screen 3

Step 6 Continue to Connect CGM OR return to New User Setup

Omnipod Eros

Step 3 Begin the process of configuring your Eros pod by tapping the blue "Continue" button at the bottom

Eros Screen 1

Step 4 Choose the expiration reminder that you prefer and tap "Next"

Eros Screen 2

Step 5 Choose the low reservoir reminder that you prefer and tap "Next"

Eros Screen 3

Step 6 Choose your insulin type and tap "Continue"

Eros Screen 4

Step 7 Connect your RileyLink, OrangeLink, or EmaLink and tap "Continue"

Eros Screen

Step 8 Continue to Connect CGM OR return to New User Setup

Omnipod Dash

Step 3 Begin the process of configuring your Dash pod by tapping the blue "Continue" button at the bottom

Eros Screen 1

Step 4 Choose the expiration reminder that you prefer and tap "Next"

Eros Screen 2

Step 5 Choose the low reservoir reminder that you prefer and tap "Next"

Eros Screen 3

Step 6 Choose your insulin type and tap "Continue"

Eros Screen 4

Step 7 Continue to Connect CGM OR return to New User Setup

Dana(RS/-i)

Step 3 Select your Dana pump model from the list and tap "Continue"

Dana Screen 1

Step 4 Read the in-app information and tap "Continue" when ready to proceed

Dana Screen 2

Step 5 Choose your insulin type and tap "Continue"

Dana Screen 3

Step 6 Choose your insulin delivery speed and tap "Continue"

Dana Screen 4

Step 7 Select your pump from the list of found pumps

Dana Screen 5

Step 8 Continue to Connect CGM OR return to New User Setup

Pump Simulator

Warning

If using a pump simulator, it is important to understand:

  • You will only experience the user interface of Trio.
  • Using a pump simulator does not indicate how the app will perform, nor will it give accurate guidance or suggestions for insulin dosing.
  • Trio may not run consistently in the background when using a pump simulator.
  • If you use a pump simulator and switch to a live pump, you must delete all insulin dosing history by uninstalling the Trio app and reinstalling it.
  • Only use a pump simulator if you understand the conditions above.

Step 3 Choose from the variety of simulator pump options and tap "Done" in the upper right corner to activate the pump simulator

Pump Simulator

Step 4 Continue to Connect CGM OR return to New User Setup